HappyModel Crux3 1S ELRS 3inch Toothpick Built-in F4 FC SPI ELRS Caddx Ant EX1202.5 Motor FPV RC Racing Toothpick Drone Insta360

& Free Shipping

Free shipping on orders over $50!

  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal

Description

  • High-concerned chemical: none
  • Is Electric: No battery
  • Anti-wind Ability: NONE
  • Drone Weight: NONE
  • Takeoff Weight: NONE
  • Transit Time (Days): NONE
  • Video Capture Resolution: Other
  • Indoor/Outdoor Use: Indoor-Outdoor
  • Camera Mount Type: Other
  • Controller Mode: MODE1,MODE2
  • Flight Time: 5~10
  • Controller Battery: NONE
  • Control Channels: 6 channels
  • Flightheight: <120m
  • Is Batteries Included: No
  • Maximumflightspeed: ≤19m/s
  • Remote Distance: NONE
  • Remote Control: No
  • Type: HELICOPTER
  • Aerial Photography: Yes
  • Package Includes: Original Box
  • Material: Carbon Fiber
  • Features: App-Controlled
  • Brand Name: SKYEH
  • Origin: Mainland China
  • Recommend Age: 14+y

Noticed: Not include the Insta360 go2 or CaddxFPV peanut camera.

Features:
40gram 1s brushless Toothpick drone
AIO Flight controller with ELRS Receiver and 5.8G VTX
CADDX ANT Camera
New 1202.5 KV11500 brushless motor
Recommend to use 1s 450mah/650mah/660mah/720mah battery
Compatible with CaddxFPV Peanut and Insta360 GO2
Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery

Specifications:
Brand Name: Happymodel
Item Name: Crux3 1S ELRS
Wheelbase: 115mm
Size: 97mmx97mmx35mm (without propellers)
Weight: 40g(without battery)

Package includes:

Item Name

Qty

Crux3 Frame and canopy

1

ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver

1

Happymodel EX1202.5 KV11500 brushless motor

4

Gemfan 75mm bi-blade Propellers(4cw+4ccw)

1

Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

1

5.8G 25mw~200mw 40ch vtx (Flight controller built-in)

1

Screw Driver

1

Propeller disassemble tool

1

3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut

Happymodel Handbag

1

Motor

Mode: EX1202.5 KV11500
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
Weight(g):4.4g
No.of Cells(Lipo):1S

Propellers

Gemfan 75mm
Center Thickness:5mm
Prop Diameter:75mm
Center Hole diameter:1.5mm
Pitch:0.9in

Flight controller

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controllerfirmware target: CRAZYBEEF4SX1280

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT300

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna
Telemetry output Power: <12dBmReceiver protocol to flight controller:  CRSFCould bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest

Onboard 5.8g VTX

Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready

Caddx ANT 1200tvl camera

Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Weight: 2g (N.W.)

Please select your product
0