Key Features & Benefits
Powerful 30W/60W Mono Output: Designed specifically to drive subwoofers and high-power speakers with impactful sound at 4Ω load.
Genuine TI TPA3118 Class D IC: Features authentic Texas Instruments chip for high efficiency (>90%) and low distortion, delivering clean and robust audio.
Wide Voltage Input (DC 8-24V): Flexible compatibility with 12V car battery, 19V laptop adapter, and other DC power sources for versatile applications.
Built-in Multiple Protections: Integrated over-temperature, over-current, and under-voltage lockout for safe operation of both amp and speakers.
Compact & Easy Integration: Screw terminals provide secure and straightforward connections for seamless integration into your DIY speaker or audio system.
Product Description
This is a mono amplifier board based on the high-performance TPA3118 Class D audio amplifier chip. With its high conversion efficiency, excellent audio fidelity, and compact form factor, it serves as an ideal core component for building powerful subwoofers, upgrading car audio systems, or adding high-quality audio output to any electronics project. Both audiophiles and makers can achieve professional-level sound amplification with ease.
CRITICAL: Power Supply Requirement! Must use a stable DC 8-24V switching power supply capable of continuous current ≥5A. An underpowered supply will cause weak output, distortion, or even damage.
Heat Sink is MANDATORY! When output exceeds 30W or during prolonged high-power use, you MUST attach a heatsink to the chip . Overheating triggers protection (muting) or causes permanent failure.
Impedance Matching: Recommended for 4Ω or 8Ω speakers. Do not connect loads below 4Ω.
Connection Sequence: Always connect power and speakers first, before connecting the audio input signal to avoid pop noise.
Not Included: This listing is for the amplifier board only. Power adapter, audio cables, speakers, and enclosure are NOT included.
Specifications
Core Amplifier IC: Texas Instruments TPA3118
Output Power: 60W (4Ω, THD<10%); 30W (8Ω, THD<10%)
Recommended Operating Voltage: DC 12V – 19V
Voltage Range: DC 8V – 24V
Quiescent Current: < 30mA
Frequency Response: 20Hz – 20kHz
Signal-to-Noise Ratio (SNR): ≥ 95dB
THD+N: < 0.1% (Typical)
Recommended Speaker Impedance: 4Ω – 8Ω
PCB Dimensions: Approx. 45mm x 35mm