YJCO Dual TPA3255 Digital Power Amplifier 2.1 Channel HiFi Decoder Amp Bluetooth 5.4 LDAC Audio Receiver 300W×2+600W Subwoofer

& Free Shipping

Free shipping on orders over $50!

  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
SKU: 1005012611245788 Categories: ,

Description

  • Number of channels: 2
  • High-concerned chemical: none
  • Material: Metal
  • Output Power: 300W
  • Control Method: Push button
  • Surround sound channel configuration: Others
  • Parts: Amplifier board
  • Package: Yes
  • Channels: 3 (2.1)
  • Model Number: D185
  • Maximum Power Per Channel: Above 200W
  • Brand Name: YJCO
  • Origin: Mainland China
  • Certification: CE,RoHS
  • Item: High Power Amplifier

Package:

Power Amplifier *1
No Power Adapter Included

Using Instruction:

1. The power amplifier output terminals are only compatible with passive speakers. Do not connect active speakers or constant-voltage loudspeakers.
The AUX low-level output is intended for active speakers or powered subwoofers and transmits full-range audio signals.
2. The amplifier runs on DC 24V–48V. Higher input voltage yields greater output power, but the voltage must never exceed 48V, or the amplifier will burn out.
Power connector: 5.5×2.5 mm, center positive, sleeve negative.
3. The rear switch controls power operation.
Toggle the switch upward to power on the unit; the VU meter and input indicator lights will turn on.
Toggle it downward to turn off all lights and put the unit into standby mode.
4. Short press the VOL/MODE knob to switch input sources, and the corresponding indicator will illuminate.
5. Never connect the negative output terminals of the left and right channels together, otherwise the amplifier will sustain permanent damage.
6. For Bluetooth playback: Switch the input source to BT mode. Search for and pair with the Bluetooth device name YJCO-QCC3084, then stream music wirelessly.
7. For USB playback: Switch the input source to USB mode.
You can connect it directly to a computer or mobile phone without installing drivers.
When connecting a phone via OTG, an OTG cable is required; standard charging cables will not work.
The USB port does not support USB flash drive playback.

Specifications:

Model: D185
Input Interfaces: RCA, Coaxial (COAX), Optical (OPT), Bluetooth (BT), USB
Output Interfaces: 3 sets of crystal terminal blocks, 1 × AUX line-level output
Power Amplifier Chip: TPA3255 × 2
Bluetooth Version: Bluetooth 5.4
Frequency Response: 20Hz – 20kHz
Bluetooth Chip: QCC3084
Supported Bluetooth Codecs: SBC / AAC / APTX / APTX-LL / LDAC, 16–24Bit, 44.1–96kHz
USB Chip: PCM2706
USB Audio Format: PCM 16bit, 44.1kHz–48kHz
Optical & Coaxial Audio Format: PCM 16bit–24bit, 44.1kHz–192kHz
Decoding Chip: ES9038Q2M
Operational Amplifier: TL072 × 10
Treble & Bass Adjustment (L/R Channels): Treble: -5dB ~ +10dB, Bass: -12.5dB ~ +3dB
Subwoofer Output Frequency: 20Hz – 180Hz
Subwoofer Crossover Range: 60Hz – 160Hz
Power Supply: DC 24V–48V
Rated Output Power: 300W × 2 (4Ω) + 600W × 1 (2Ω), measured at 48V input
Total Harmonic Distortion: 0.02%
Bluetooth Transmission Distance: 10 meters
Protection Features: Reverse polarity protection, short-circuit protection, auto-recovering overheat protection
Dimensions: 146mm × 148mm × 90mm
Weight: 1.2kg
DC Power Jack: 5.5×2.5 mm

Please select your product
0